High speed Edge Banding Machine RFB865
Parameters:
Standard Configuration:
1. Gluing system
In gluing system, the glue box is coated with Teflon, which makes the box cleaning easier. The glue box has the temperature maintaining function and can shorten heating time and avoid the glue carbonization. The machine can use the high temperature EVA hot melt glue and can deliver the glue by spiral structure. The glue box size is 200*150*450mm.
2. Feeding and edge cutting system
When the single unit feeding system can be used to load the strip (optional) and roller type edge bands and the edge band thickness can be 0.4~3mm. If the single work unit can not meet the working requirements, the 2-10 feeding units can be selected. The edge cutting cylinder is controlled by double solenoid valves.
3. Press system
The precise large press wheel and glue wheel can work together to ensure the press effect. The small press wheel are composed of 2 upper and lower cone wheels and 1 straight wheel. The upper and lower cone wheels can ensure the good press effect. The large and small press wheels are controlled by the separate pressure control valve.
Optional: One large wheel can be equipped with 5 small wheels.
Optional:
1. Misting station
A. Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
B. Before buffing: Improve the cleaning effect of the plate.
2. Pneumatic Tool Alignment System
1). Input the new thickness of edgeband, then it can change the edgeband automatically.
2). Position location of cylinder, work with 0.4-3mm edgeband.
3). The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate.
3. Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.
Parameters:
| Model | RFB465 |
| Panel length | ≥120mm |
| Panel width | ≥60mm |
| Panel thickness | 10-60mm |
| Edgeband thickness | 0.3-3mm |
| Feeding speed | 13-22m/min |
| In-put voltage | 380V. |
| In-put frequency | 50HZ.3P |
| Total power | 8.5KW |
| Required air pressure | 0.6Mpa |
| Overall dimensions(L*W*H) | 4080*900*1560mm |
1. Gluing system
In gluing system, the glue box is coated with Teflon, which makes the box cleaning easier. The glue box has the temperature maintaining function and can shorten heating time and avoid the glue carbonization. The machine can use the high temperature EVA hot melt glue and can deliver the glue by spiral structure. The glue box size is 200*150*450mm.
2. Feeding and edge cutting system
When the single unit feeding system can be used to load the strip (optional) and roller type edge bands and the edge band thickness can be 0.4~3mm. If the single work unit can not meet the working requirements, the 2-10 feeding units can be selected. The edge cutting cylinder is controlled by double solenoid valves.
3. Press system
The precise large press wheel and glue wheel can work together to ensure the press effect. The small press wheel are composed of 2 upper and lower cone wheels and 1 straight wheel. The upper and lower cone wheels can ensure the good press effect. The large and small press wheels are controlled by the separate pressure control valve.
Optional: One large wheel can be equipped with 5 small wheels.
Optional:
1. Misting station
A. Before pre-milling: Prevent the upper and lower surface from sticking with glue, improve the edge banding effect.
B. Before buffing: Improve the cleaning effect of the plate.
2. Pneumatic Tool Alignment System
1). Input the new thickness of edgeband, then it can change the edgeband automatically.
2). Position location of cylinder, work with 0.4-3mm edgeband.
3). The manual adjustment is no longer required. The worker only needs to place the corresponding edgebands at the entrainment position. Easy to operate.
3. Hot air blowers
Brings high gloss shine back to PVC banding after the 3mm scrape station.
Blow after the scrape station, make buffing effect better.
FAQ:
Q1:How to choose the right sliding table saw?
A: We can recommend you right models based your personal requirment if you do not know how to choose.
Q2:What is the working table length of panel saw?
A: Usually is 1500-3800mm. Also It is changeable according to clients requests.
Q3:How to ensure the safety?
A:There are the overload and overheat protection that ensure the safety of working people
Q4:How long the table saw machine can be used?
A: It depends how you use your table saw, if use it in good maintenance, at least 8-10 years.